Sand & Shell Casting Manufacturer in Bengaluru — CI, SG Iron, Aluminium, Steel & Brass
Sand & shell moulded castings in CI, SG Iron, Aluminium, Steel and Brass. Exhaust manifolds, valve bodies, cylinder heads, liners & volute casings — Bengaluru.
Introduction
We are a sand casting manufacturer in Bengaluru, working in CI, SG Iron, Aluminium, Steel and Brass. We use both sand casting and shell moulding, depending on what your part needs — tighter tolerance, a smoother surface, or a bigger production run.Over the years, we've cast exhaust manifolds, valve bodies, cylinder head cores, air-cooled liners, and volute casings for customers across India. If your part falls in this list, we've likely made something close to it already.
Sand Casting vs Shell Moulding — What's the Difference?
Both start with a mould, but they're built differently.
Sand casting
uses loose, compacted sand around a pattern. It's cost-effective and works well for larger or lower-volume parts.
Shell moulding
uses a thin, resin-bonded sand shell formed around a heated pattern. It holds tighter tolerances and gives a smoother finish, which suits parts with fine detail.
We help you pick the right process based on your drawing, quantity, and finish requirement — not the other way around.
Metals We Cast
As a trusted cast iron foundry in Bengaluru, we also cast several other metals:
Cast Iron (CI)
Good wear resistance and machinability. Common in housings and brackets.
SG Iron
Also called ductile iron. Stronger and more flexible than CI, so it’s a good fit for automotive and hydraulic parts.
Aluminium
Light in weight with decent strength. Popular for parts where weight matters, like liners and covers.
Steel
High strength for parts under heavy load or stress.
Brass
Corrosion-resistant and easy to machine. Often used for valve fittings and small precision parts.
Full Range
Components We Manufacture
| Component | Metal Used | Typical Industry |
|---|---|---|
| Exhaust Manifold | CI, SG Iron | Automotive |
| Valve Body | Brass, CI | Hydraulics, Fluid Control |
| Cylinder Head Core | CI, Aluminium | Automotive, Engines |
| Air-Cooled Liner | CI, Aluminium | Automotive, Engines |
| Volute Casing | CI, SG Iron | Pumps |
How We Work
Our Casting Process
Pattern Receipt
We check your drawing or pattern before starting.
Mould Preparation
Sand or shell mould is prepared based on the part.
Melting & Pouring
Metal is melted and poured into the mould.
Fettling & Finishing
Excess material is removed and the surface is cleaned up.
Quality Inspection
Every batch is checked before it leaves the foundry.
Dispatch
Finished parts are packed and shipped.
ACCREDITATIONS
Quality & Certifications
We follow set inspection steps at every stage, from raw material checks to final dimensional inspection, so defects are caught early — not after delivery. As an ISO certified sand casting foundry in Bengaluru, we document our process so your procurement team has the paperwork it needs.
Sectors We Serve
Industries We Serve
We work with customers across automotive, hydraulics, pumps and valves, and general engineering. Whether you need a custom sand casting manufacturer for automotive components or a foundry partner for pump parts like volute casings, we can take your project from drawing to dispatch.
Pumps & Valves
Aerospace
Power & Energy
Heavy Engineering
Frequently Asked Questions
What is the difference between sand casting and shell moulding?
Sand casting uses a loose sand mould. Shell moulding uses a thin resin-bonded sand shell, which gives tighter tolerances and a better surface finish.
What is SG Iron casting used for?
SG (spheroidal graphite) iron is stronger and more ductile than standard cast iron. It's widely used in automotive and hydraulic components.
Which metals can be sand cast?
CI, SG Iron, Aluminium, Steel and Brass can all be sand cast. Each suits different strength and weight needs.
What is the shell mould casting process?
Resin-coated sand is shaped around a heated pattern to form a rigid shell. This shell is then used to cast the final part.
What is the difference between CI and SG iron?
SG iron has graphite in a spherical form, which gives it more strength and flexibility. Standard CI has graphite in flake form, which makes it more brittle.
What is the cost of sand casting per kg in India?
Cost depends on the metal grade, part complexity, and order quantity. Share your drawing with us for an accurate per-kg quote.
What is a volute casing used for?
A volute casing houses the impeller inside a centrifugal pump. It directs fluid flow and helps build pressure.
Which industries use sand casting?
Automotive, hydraulics, pumps & valves, and general engineering are the main industries that rely on sand and shell castings.